FSCM 09049

CCS Certifications

Home Previous Page UL/CSA ATEX Baseefa CRN ISO 9000 AS9100 CE Mark

 

CCS Certifications:

List of Industrial Switch models certified by ATEX

Click to Print this document

ATEX BASEEFA Certifications and Registrations
Electrical equipment defined in the EECS SCHEDULES 1 & 2, GROUP II
Certificate to the European community directive 94/9/EC
Equipment Intended for use in Potentially Explosive Atmospheres
for Category 2 Equipment and carry the marking


CCS Certified Products

COMPLIANCE WITH
CCS License EECS 0253/0254 & CCSI License BS EN ISO 9002:1994
Multiple Site Marketing Registration License.
CCS Quality Assurance Notification EECS ATEX 0253

Documentations
and
Installation Instructions


646*Y Series Certificate #
Baseefa 05ATEX0011X

Compliance with the Essential Health and Safety Requirements: EN 60079-0:2004, EN 60079-1:2004 and EN 50281-1-1: 1998 + Amendment 1 “Electrical apparatus for explosive gas atmospheres. Flameproof enclosures”

646*EY*-P/N 10-1153
646T*EY*-P/N 10-1154

II 2 GD Ex d IIC T85°C (Tamb –34°C to +71°C)
II 2 GD Ex d IIC T100°C (Tamb –34°C to +86°C)


672DE Series:  Certificate #
Baseefa 04ATEX0114X

Compliance with the Essential Health and Safety Requirements: EN 60079-0:2004, EN 60079-1:2004 and EN 50281-1-1: 1998 + Amendment 1 “Electrical apparatus for explosive gas atmospheres. Flameproof enclosures”

672DE*-P/N 10-1150

II 2 GD Ex d IIC T85°C (Tamb –34°C to +71°C)
II 2 GD Ex d IIC T100°C (Tamb –34°C to +86°C)


6403 Series Certificate #
Baseefa 04ATEX0113

Compliance with the Essential Health and Safety Requirements: EN 60079-0:2004, EN 60079-1:2004 and EN 50281-1-1: 1998 + Amendment 1 “Electrical apparatus for explosive gas atmospheres. Flameproof enclosures”

6403*EY*
P/N 10-1155
6403T*E*
P/N 10-1159

II 2 GD Ex d IIC T85°C (Tamb –34°C to +71°C)
II 2 GD Ex d IIC T100°C (Tamb –34°C to +86°C)


6905 Series Certificate #
Baseefa 03ATEX0700X

Compliance with the Essential Health and Safety Requirements: EN 50014: 1997+Amendment 1 and 2, EN 50018: 2000+Amendment 1 and EN 50281-1-1:1998+Amendment 1 with respect to gas group IIC. “Electrical apparatus for explosive gas atmospheres. Flameproof enclosures”

6905*E*
P/N 10-1095

II 2 GD Ex d IIC T85°C (Tamb –34°C to +71°C)
II 2 GD Ex d IIC T100°C (Tamb –34°C to +86°C)


675 Series Certificate #
Baseefa 08ATEX0347X

Compliance with the Essential Health and Safety Requirements: EN 60079-0:2004, EN 60079-1:2004 and EN 50281-1-1: 1998 + Amendment 1 “Electrical apparatus for explosive gas atmospheres. Flameproof enclosures”

675*EY*
P/N 10-1168

II 2 GD Ex d IIC Ex tD A21 T85°C (Tamb –34°C to +71°C)
II 2 GD Ex d IIC Ex tD A21 T100°C (Tamb –34°C to +71°C)


642 Series Certificate #
Baseefa 07ATEX0108X

Compliance with the Essential Health and Safety Requirements: EN 60079-0:2004, EN 60079-1:2004 and EN 50281-1-1: 1998 + Amendment 1 “Electrical apparatus for explosive gas atmospheres. Flameproof enclosures”

642*EY*
P/N 10-1163

II 2 GD Ex d IIC Ex tD A21 T85°C (Tamb –34°C to +71°C)
II 2 GD Ex d IIC Ex tD A21 T100°C (Tamb –34°C to +71°C)


6*** Series Switches Utilizing 46-**** Electrical Assembly Certificate #
Sira 08ATEX1046X

Compliance with the Essential Health and Safety Requirements: EN60079-0:2006, EN 60079-1:2007, EN 61241-1:2004

6900*EY*
P/N 10-1166
674DEY*
P/N 10-1170
611*EY*
690*EY*

Note: Copies of CCS and CCS International  licenses and certificates are available from your distributor upon request.

DEFINITION

UL (Underwriters Laboratories) - A nonprofit corporation engaged in developing standards and testing for safety. Products bearing UL labels have been tested for conformity to UL standards. UL maintains a product surveillance program to ensure continuing conformity to UL standards.

UL LISTED PRODUCT - A product that has been tested and complies to UL requirements for reasonably foreseeable hazards associated with the product and is subject to continuing UL product surveillance. UL authorizes the manufacturer to use the UL Listing mark.

UL RECOGNIZED COMPONENT - A part or subassembly that has been tested and complies to UL requirements for components used in an end product which complies with UL requirements. The component is subject to continuing UL surveillance. UL authorizes the manufacturer to use the UL Recognized mark.

CSA (Canadian Standards Association)  
A nonprofit voluntary association engaged in standards development and certification activities. A CSA certified electrical product conforms to applicable requirements of the Canadian Electrical Code. Representative prototypes are tested prior to certification and CSA maintains a production surveillance program to ensure continuing conformity.

CRN (Canadian Registration Services) Statutory Declaration, Registration of Fitting (Technical Standards and Safety Act, 2000, and Regulations for Boilers and Pressure Vessels and CSA Standard B51)

BASEEFA (2001) Ltd. (British Approvals Service for Electrical Equipment in Flammable Atmospheres) The British national testing and certification authority for electrical equipment used in hazardous locations other than mines.

ISO 9000 Series

What is the ISO 9000 Series? The ISO 9000 series of documents was created by the International Organization for Standardization to set international requirements for quality management systems. Now adopted by over 80 countries, use of the series of standards has become commonplace in the business world.

AS9100

What is AS9100? AS9100 is the Quality Systems Aerospace Model for Quality Assurance in Design, Development, Production, Installation and Servicing. AS9100 was developed using the ISO 9001, AS9000, and EN9000-1, and builds upon their requirements to produce a globally-harmonized standard that meets the requirements of aerospace companies worldwide. The first standard available for use across the global aerospace community, AS9100 adds the additional requirements necessary to address both civil and military aviation and aerospace needs.

CE Mark

The CE Mark is a mark placed on a product as the manufacturer’s visual identifier that the product meets the requirements of one or more European Directives. A valid CE Marking affixed to a product indicates that it complies with the relevant European 'New Approach' product safety Directives. The 'New Approach' Directives resulted from a 1985 agreement between EC Ministers to implement a 'New Approach to Technical Harmonisation and Standards' in order to ease the free movement of goods within Europe.  The Directives contain the essential requirements that a product must meet to be sold in the European Union (EU). These Directives are then supported by European Standards listed in the Official Journal of the European Union (OJEU).  Meeting the applicable Standards confers compliance to the relevant 'New Approach' Directives.

 

Custom Control Sensors, Inc.
21111 Plummer Street, Chatsworth CA 91311 Ph: (818) 341-4610; Fax: (818) 709-0426
Last Updated on  09/01/2006