| WARNING: If this switch is used to protect equipment or personnel from unsafe pressure or to guard against the hazardous release of contained substances, it must be installed and operated in accordance with applicable codes, regulations and standards. This switch must be used in conjunction with system design's) or procedure's) necessary to mitigate any hazard resulting from its failure. Conform to installation instructions accompanying this switch. Individuals who ignore
this warning may suffer serious or fatal injury and do so at their own risk. Custom Control Sensors is not liable for any misuse, abuse, suitability or adequacy of user’s application of the switch. Service by qualified personnel only.
MEDIA: System media must be compatible with the specified wetted materials. Oxygen media cannot be utilized without special cleaning and packaging provided by the factory. |
OPERATING CONDITIONS: The electrical load, ambient temperature ranges, and proof pressure specified must not be exceeded. Surge pressurization should not exceed 200,000 psi per second to diaphragm switch models and 1 million psi per second to piston switch models. In installations that will be subject to severe shock, vibration, or other hostile environment conditions, contact the factory to determine suitability.
MEDIA: Field adjustable units should be set no closer than 1/2 turn from either end of their adjustment range.
UL/CSA/BASEEFA/ATEX: Field repairs or modifications of "certified" and "listed" units may void the listing of the repaired or modified unit.
Effective
August 2, 2005, CCS implemented Return Switch
Authorization Policy.
This policy will require that all products returned to CCS be identified with an
RMA number assigned by CCS. Please consult CCS
Sales or
Engineering Department. |
